How to Host a RuneScape Dragonwilds Server: Hosted, Self Hosted or Free (2026)

Host a RuneScape Dragonwilds server three ways: hosted in a minute, self hosted with SteamCMD app 4019830 and UDP 7777, or free co-op. Steps and fixes.

Updated Nov 5, 2026 · 12 min read

On this page

There are three ways to host a RuneScape: Dragonwilds server. Host it with us and your dedicated world is online about a minute after checkout, with crossplay and up to 6 players. Host it yourself for free by installing Jagex's dedicated server (SteamCMD app 4019830) on a 64 bit Windows or Linux PC with 2 GB of RAM plus 1 GB per player, and forwarding UDP port 7777. Or skip the server and host a co-op world from your own game, which is free but holds 4 players and closes when you quit. This guide covers all three.

Which way should you host Dragonwilds?

Co-op from your game Dedicated server at home Hosted server
Cost Free Free, plus electricity From 9.99 USD a month, splittable
Players Up to 4 Up to 6 Up to 6
World online when the host is offline No Only while that PC is on Yes
Setup A few clicks SteamCMD, DedicatedServer.ini, UDP 7777 About 60 seconds after checkout
Updates Automatic with the game Run SteamCMD after every patch A restart
Console groups Consoles can host co-op Needs a PC or Linux box Join with crossplay

Co-op is fine for a duo or trio who always play together. As soon as someone wants to play while the host is offline, or you have 5 or 6 players, you need a dedicated server, at home or hosted. Nobody on PlayStation, Xbox or Switch 2 can run the dedicated server, so for a console group a hosted world is the only always online option.

Since the 1.0 release on 15 September 2026, dedicated servers support crossplay, so friends on PC, PlayStation 5, Xbox Series X|S and Nintendo Switch 2 can join the same world.

How much RAM does a Dragonwilds server need?

Jagex's rule is 2 GB of RAM plus 1 GB per player, and our plans follow it exactly:

Players at the same time RAM Our plan
Duo world, 2 players 4 GB Starter, 9.99 USD a month
Small group, up to 4 players 6 GB Standard, 14.99 USD a month
Full world, 6 players 8 GB Pro, 19.99 USD a month

At home that memory is on top of anything else the machine is doing. If you also play Dragonwilds on the same PC, it needs enough memory for the game and the server together. More on sizing in how much RAM a game server needs.

Option 1: Host a Dragonwilds server with GamezServers

  1. Pick a plan from the table above by how many of you play at the same time. If your duo turns into a group of five later, move up a plan in Settings and nothing is lost. New customers get 50% off the first month.
  2. Split the bill if you like. Choose Split with friends at checkout to share it between 2 and 10 people, each paying their own share by card with a 1 USD fee per share. A Pro world split six ways is about 4.33 USD each. Your server starts as soon as you pay your share, and friends who make an account with the email they paid with see it in their own dashboard.
  3. Paste your Player ID. Checkout asks for it. You find it in game at the bottom of the Settings menu, with a copy button. The server does not start without it, and it makes you the owner of the world. Checkout also asks for a world name and an optional world password. The admin password is made for you if you leave it empty, and you can see it in your panel.
  4. Pay and open your server. Pay by card, Apple Pay or Google Pay. The server appears under Your servers as Setting up, then Online. There is no SteamCMD, no Linux libraries and no port to forward.
  5. Share the world name. In Dragonwilds players do not type an address. They search for the world name, and the search is case sensitive, so share it exactly, capitals included.

Billing is monthly with no contract, and you can cancel any time from the dashboard. The server runs to the end of the paid month. See billing and cancellation and the getting started doc.

How do players join a Dragonwilds server?

  1. Start RuneScape: Dragonwilds on PC, PlayStation 5, Xbox Series X|S or Nintendo Switch 2.
  2. Open the Worlds screen and go to the Public tab.
  3. Search for the exact world name. An uploaded world uses its save file name.
  4. Or enter the invite code in the world browser. Anyone already in the world can find it in the pause menu, and it is the easiest way in for console players.
  5. Enter the world password if there is one, pick your character and join.

Inviting friends through Steam does not work for dedicated servers yet, so use the name search or the invite code. If the world does not appear, see Dragonwilds server not showing up.

Admin controls

Open Pause > Settings > Server Management in game and enter the admin password from your panel. Anyone with the password is an admin until you change it. Admins can ban players who are online, and only you, the owner, can unban someone or ban a player who is offline. See how to become admin on a Dragonwilds server.

Option 2: Make a Dragonwilds server on your own PC

The dedicated server is a free tool from Jagex. It runs on 64 bit Windows or 64 bit Linux, downloads with an anonymous login and does not need a second copy of the game. Consoles cannot run it. You also need your Player ID from the bottom of the in game Settings menu, and access to your router.

Step 1: Download the server

The dedicated server is Steam app 4019830. On Windows you can also install it as a free tool in the Steam client.

Linux:

steamcmd +force_install_dir /home/dragonwilds/server +login anonymous +app_update 4019830 validate +quit

On Windows the same command works with a path like C:\dragonwilds-server. Run it again whenever the game updates, because players cannot see a server on an older build. Jagex patches often after a big release: 1.0.0.4, 1.0.0.5 and 1.0.0.6 all shipped within two weeks of 1.0. See the 1.0.0.6 patch notes.

Linux needs a few 32 bit libraries for SteamCMD. On Debian or Ubuntu:

sudo dpkg --add-architecture i386
sudo apt update
sudo apt install lib32gcc-s1 libc6:i386 libstdc++6:i386

Do not run the server as root. Make a separate user for it, for example sudo useradd -m dragonwilds, and install and launch as that user.

Step 2: Run it once

Start the server so it creates its folders and config file.

Linux:

chmod +x RSDragonwildsServer.sh
./RSDragonwildsServer.sh -log -NewConsole -Port=7777

On Windows, run the server executable in the install folder with the same -log -NewConsole parameters, from a shortcut or a .bat file.

Once it has finished starting, stop it. Always stop the server before editing its config: changes made while it runs are lost when it saves.

Step 3: Fill in DedicatedServer.ini

The config file lives here:

  • Linux: RSDragonwilds/Saved/Config/LinuxServer/DedicatedServer.ini
  • Windows: RSDragonwilds/Saved/Config/WindowsServer/DedicatedServer.ini

The settings sit under [/Script/Dominion.DedicatedServerSettings]. Four are required, the rest optional:

Key What it does
OwnerId Your Player ID from the in game Settings menu. It makes you the owner
ServerName The server's name
DefaultWorldName The world the server creates and loads. Players search for this name, and it is case sensitive
AdminPassword Opens the Server Management tab in game
WorldPassword Optional. Players must enter it to join
PlatformPolicy Which platforms can join. Crossplay lets everyone in

Keep the server and world names short, around 16 characters, and write the world name down exactly as you typed it. Save the file and start the server again.

Step 4: Open UDP port 7777

The server uses UDP port 7777 by default. A second server on the same machine uses 7778, and so on. You can pick the port yourself with -Port= on the launch line.

  1. Allow UDP 7777 through the firewall on the server machine. On Ubuntu: sudo ufw allow 7777/udp.
  2. Forward UDP 7777 on your router to the server's local IP address.

Our port forwarding guide covers the router side. If your router's WAN IP is different from your public IP, your provider uses CGNAT and forwarding cannot work. See how to tell if you are behind CGNAT.

Step 5: Turn on crossplay

Crossplay is the PlatformPolicy=Crossplay line in DedicatedServer.ini. If it says PC or another single platform, change it to Crossplay, save and restart. Crossplay worlds appear in the world browser for every platform. Console players may also need to allow crossplay and online play with other platforms in their console's privacy or parental control settings. Full details in Dragonwilds dedicated server crossplay.

Step 6: Let friends connect

Friends join from the Worlds screen the same way as on a hosted server: search the Public tab for the exact world name, or enter the invite code from the pause menu. Then they enter the world password if you set one.

Option 3: Host Dragonwilds co-op for free

  1. Start Dragonwilds and load your world in multiplayer.
  2. Choose whether the session is crossplay. Since 1.0 you pick this each time you host.
  3. Share the invite code from the pause menu, or have friends search the world name.

Co-op holds 4 players at most, you included. The world closes when you quit, and your PC does all the work while you play. Consoles can host co-op too. More in how many players can play Dragonwilds.

What are the catches with hosting for free?

  • The PC has to stay on. If it sleeps, restarts for Windows updates or someone turns it off, the world goes offline.
  • Electricity is not free. As an example, a PC that draws 100 W around the clock uses about 72 kWh a month. At 0.17 USD per kWh that is about 12 USD a month. Check your own PC's draw and your local rate.
  • Patch day is your job. Players cannot see a server on an older build, so someone has to run SteamCMD and restart after every patch.
  • Your router. UDP 7777 must be forwarded, and with CGNAT it cannot be.
  • Your home IP is shared with everyone who joins. See is hosting a game server at home safe.

Free cloud tiers are rarely a good fit. Many offer around 1 GB of memory, well under the 4 GB a duo needs, and the larger always free offers tend to use ARM processors, while Jagex ships the server for standard 64 bit Windows and Linux. Free trial credits run out. Be wary of sites offering free Dragonwilds hosting in exchange for logging in with your game account or downloading a "server launcher". The real server needs nothing but SteamCMD and your Player ID.

How do you move an existing world to the server?

Worlds are single .sav files. On a Windows PC they are in %LOCALAPPDATA%\RSDragonwilds\Saved\SaveGames. Keep a copy of the original somewhere safe first.

  • On our servers: stop the server, press Backup, then upload your .sav into RSDragonwilds/Saved/SaveGames in the Files tab without renaming it, and start it again. Players then search for the file name without .sav, so make sure the world name in Settings matches it.
  • At home: copy the .sav into the server's RSDragonwilds/Saved/SaveGames folder, set DefaultWorldName to that world's name and restart.

Want a PvP, creative or custom world? Create it in game with the settings you want, enter it once and leave, then upload its .sav the same way. Step by step: how to transfer a Dragonwilds world to a dedicated server.

Can you add mods to a Dragonwilds server?

No. Dragonwilds has no mod support for dedicated servers, so the server runs the game as Jagex ships it.

Backups, updates and upgrades

  • Backups: on our servers, press Backup before every big boss fight and every patch. Each server keeps 3. At home, copy the save folder.
  • Updates: our servers update on a restart, so after a patch take a backup and restart. At home, run the SteamCMD command again.
  • Sleep when empty: our servers stop after 4 days with nobody online and start again in one click, with the world saved. Turn it off in Settings to keep it online all the time.
  • Upgrading: pick a bigger plan in Settings. The price is prorated and the new RAM applies after a restart.

Common problems

  • The world does not show in search: the name is not typed exactly, including capitals, players are searching the server name instead of the world name, or the server has not finished starting.
  • Friends time out at home: UDP 7777 is not forwarded, the firewall is blocking it, or the server is on a different port than you think.
  • Config changes disappear: you edited DedicatedServer.ini while the server was running. Stop it, edit, start again.
  • No admin controls: AdminPassword is empty or OwnerId is not your Player ID. On our servers, check both in Settings.
  • Console players cannot see the world: crossplay is off on the server, or blocked in the console's privacy settings.
  • "Crossplay is not enabled" error: set the date and time on your PC or console to update automatically, then try again. On Xbox also allow crossplay under Settings > Account > Privacy and online safety.
  • Version mismatch after a patch: update the server.
  • Lag with a full world: the machine needs more RAM. Six players want 8 GB.

FAQ

Is the Dragonwilds dedicated server free?

Yes. It is a free tool from Jagex, Steam app 4019830, and downloads with an anonymous SteamCMD login. You do not need to buy the game twice to run it.

How much does it cost to host a Dragonwilds server?

With us, from 9.99 USD a month for a duo, up to 19.99 USD for a full world of six. New customers get 50% off the first month, and split six ways a Pro world is about 4.33 USD each.

How many players can join a Dragonwilds server?

Up to 6 on a dedicated server, whether you run it yourself or rent one, compared with 4 when a player hosts the world in game.

Can PlayStation, Xbox and Switch 2 players join?

Yes. Since 1.0, dedicated servers support crossplay, and console players join with the invite code or the world name search.

Can I host a Dragonwilds dedicated server on PS5 or Xbox?

No. Consoles can host a co-op world for up to 4 players, but the dedicated server only runs on 64 bit Windows or Linux.

Do my friends need to own the game?

Yes. Everyone needs their own copy of RuneScape: Dragonwilds on their platform.

Can I run the server and play on the same PC?

Yes, if the PC has enough memory for both. The server alone needs 2 GB plus 1 GB per player.

Why can my friends not find the world?

Usually they are searching the server name instead of the world name, or the capitals are different. At home it can also be an outdated server build or a closed UDP port 7777.

See RuneScape: Dragonwilds server hosting to pick a plan and keep your Ashenfall world online.

Skip the setup. Your own Dragonwilds server.

$4.99USD first month

Then $9.99/mo. Just trying it? $2.50 for 3 days

Keep reading